Print PDF
Favorite
Email
Step 10The endresult
This rim was already prepared to make another wheel, because of this there where two extra holes in it.
These holes I filled with dummy valves, in my opinion this gives a nice look to the wheel, decide for yourself.
Even with completion this wheel feels very solid I want to remind you that you make/use these wheels at your own risk.
Have fun building.
These holes I filled with dummy valves, in my opinion this gives a nice look to the wheel, decide for yourself.
Even with completion this wheel feels very solid I want to remind you that you make/use these wheels at your own risk.
Have fun building.
| « Previous Step | Download PDFView All Steps | Next Step » |
7
comments
|
Add Comment
|
Apr 13, 2011. 8:58 PMenyceckk
says:
This wheel has a Mercedes Benz logo on it.
Reply
Oct 16, 2010. 5:10 PMunaffiliatedperson
says:
this would look awesome on the cruiser i found in the dumpster i found the other day. thanks for posting.
Reply
May 21, 2009. 10:05 AMUnmortal
says:
i geuss the wheel is very save bechause if ya ride a bike the wheels need to carry you around and not be like yellie puding and in this instrutabal are very much spokes that go to the center of the hub thos empty space wont be a problem i geuss you can make money with this in the neterlands bechaus we use bikes almost al day and this is just art!!
Reply
Jan 2, 2009. 11:26 AMgeppetto425
says:
This would be cool on a Unicycle!!!
Reply
Jan 8, 2009. 10:15 AMmikepenton
says:
Definitely - there's going to be an article on funky wheel builds in Uni - The Unicycle Magazine soon :)
Reply
13
Feb 1, 2009. 10:59 AMvanpaun
says:
I didn't know you guys were on here! sweet!
Reply
Apr 7, 2009. 4:30 PMntappin
says:
we are everywhere.
Reply
2
Jan 5, 2009. 12:37 AMKoil_1
says:
This is really awesome. However, wouldn't it be easier to just not mark or drill the holes for the missing spokes?
Reply
2
Jan 5, 2009. 5:56 AMMasterRed (author)
says:
Yes and no, Yes you could leave the 2 extra holes in the rim out by counting 12 off the original holes from the valve hole when marking the rim. And no for the hub because you would really need to pay very good attention when starting to layce the wheel where you start so that you end the right way. For estatics I agree that the extra holes should be omitted in the hub although I like the extra valve's with caps on the rim.
Reply
 |
Add Comment
|
