With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
You're in love. You like woodworking. You hate to buy industrial-made junk-jewelry. You want to give something personal and special. You don't want to...
Sand ONE side of the beam to get a smooth surface. No need to sand the other sides. Cut two cubes out of the beam. Use a circular saw. Don't forget gl...
Mark the midpoints of the cubes ON THE SMOOTH SURFACE. Drill a hole in each cube - I used a drill bit with a diameter of 3mm (0.1 inch) and drilled 1 ...
In the folowing two steps you'll remove all the wood you don't need. Undo the clamp. Put the mini-tower on one of it's growth rings sides. Mark the mi...
Mark the midline of the board. The axis should be exactly under this line. The two halves remain together because there's still some glue between them...
In this step you'll fix the two halves together. Take a screw - I used a stainless. Fix it on your drill or dremel. Round the edge of the screw on a ...
In this step you'll sand the 'cartouche' into it's final shape. Round the curves of the heart first. Than sand it to the thickness you want - mine is ...
You're ready to put the screw definitively on it's place. Put some sealant or glue in the enlarged hole in the inner side of one of the halves. Put so...
Put some wood-pulp in the remaining holes. Take care to use the right tint. Test it first (I didn't, big mistake!!!). Let it dry. Sand the excess with...
I used natural oil - as always. You know the smell? It's the smell of victory!!!
One of the most nerve-breaking projects I ever did. This needs precision, time and patience. I'm really satisfied with it, nice feeling ;-) My wife ...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »