Instructables

Customizing bike with DanceSkateLive sound system for a local street performer

Featured
Picture of Customizing bike with DanceSkateLive sound system for a local street performer
3258282215_f9a930ee74.jpg
3252014151_6b7b65a25c.jpg
3252014873_3f1108bea2.jpg
3252840010_ee3b712121.jpg
3252014619_31022c6551.jpg
3259112242_6844f8f297.jpg
3198874139_bea1a6ed3c.jpg
3199720014_f71e23d594.jpg
3232868811_a2d63a8f45.jpg
3277852986_3f74b81439.jpg
3277032625_3e219a19e6.jpg
3294088117_84fe7318a5.jpg
3294913180_840f73db0f.jpg
3294088493_8103c1f842.jpg
3318224250_9bd57fa315.jpg
3331740827_cac0658ed3.jpg
3331741269_0c19e7d249.jpg
3331741577_942b46e152.jpg
3332578598_8756027b56.jpg
3332578832_b2c7c9e18b.jpg
3332579104_7655b1b6ca.jpg
3340172957_b185af3b1a.jpg
3340173555_9db3ed6873.jpg
3341001302_847618ac57.jpg
3340173905_e7e3a70484.jpg
3346089626_0310e44f3b.jpg
3345255409_b2eed81f91.jpg
3346091348_05b1c18327.jpg
3345257611_b50811e0cc.jpg
Mei is a local street performer who's developing and nurturing a unique talent: the ability to hula hoop while rollerskating to classic soul music, and delivering the news of the day, be it an environmental lesson or the history of modern rollerskating. She calls her this "DanceSkateLive".

Rock The Bike created a custom Soul Cycle for Mei that helps her take her art form to the next level.
 
Remove these adsRemove these ads by Signing Up

Step 1: Get out there and meet interesting collaborators.

Picture of Get out there and meet interesting collaborators.
3198874511_d26105ced0.jpg
Mei was looking for a way to carry her street performing gear. We hooked her up with an Xtracycle and some Ice Blue Down Low Glow on a classic Bridgestone step-through mountain bike she found and suggested that she consider a custom sound system.

Step 2: Work with cardboard, box cutter, and clamps before you work rwith computers, saws, and glue.

Picture of Work with cardboard, box cutter, and clamps before you work rwith computers, saws, and glue.
3199720014_f71e23d594.jpg
3198874139_bea1a6ed3c.jpg
3252840010_ee3b712121.jpg
In the first stage of a custom bike, you need to think fast and generate lots of ideas. At this point I was just trying to put all the objects into my workspace: her skate, the speakers, the Xtracycle frame, etc. This way you can quickly get a sense of the sizes of the objects and make decisions about where things go, what can fit, and how it looks in proportion to the bike.

Step 3: Build your cabinet.

Picture of Build your cabinet.
3259112242_6844f8f297.jpg
3277852986_3f74b81439.jpg
Rather than teach woodworking, I'll just say that you will need a ton of good clamps, of all sizes. So be on the lookout for those next time you're at the flea market. As you can see, I cut this box at an angle, so that the top would be narrower than the bottom. This allows the woofer to angle up, which directs the sound to ear level.

I picked up the plywood from Macbeath on the shop Mundo. I used 5 ply 1/2" plywood. I can tell the difference in quality when comparing it the 9-ply Finnish Birch. But $60 worth of difference? Not really. We recently bought a circle buddy router jig to cut holes for speakers. It's good. The arithmetic on the setup can be a bit tricky, but you'll get the hang of it.
yet another funky & cool looking illuminated "soul cycle" design. that roller skate inside the bandpass window is really whimsical. i'd really like to see & hear this system in action on youtube.

to anyone reading this that owns a bike system, wants to build one, or just thinks they're cool, stop by the forums at bikeology and join the conversations or show your system off.
cagsmart5 years ago
whats powering it?
Sandisk1duo5 years ago
better to get speakers with a lot of Xmax, and put them in a vented box
fossilfool (author)  Sandisk1duo5 years ago
Thanks for the tip. Yes, you can see the ports we used in step 8. What have you used for port calculators?
Bass Box 6 Pro, but you'll need the exact dimensions of your speakers
whopoder5 years ago
COOL!!! And well made project :)