Print PDF
Favorite
Email
Step 3Building up the shape and hinge mount
Next we need to build up the gun, and make various sections for attaching our 'bits' to it.
With this section, if you follow the pictures along, you can see me gradually start to build up a barrel, for each layer of cardboard i made a simple paper template to get the right shape.
Each layer was glued using pva glue, with this section you can glue them all down in one go, then tape in place.
Make note of the top and forward sections, where i made space for the old stapler section (top) and the hinge (forward)
With this section, if you follow the pictures along, you can see me gradually start to build up a barrel, for each layer of cardboard i made a simple paper template to get the right shape.
Each layer was glued using pva glue, with this section you can glue them all down in one go, then tape in place.
Make note of the top and forward sections, where i made space for the old stapler section (top) and the hinge (forward)
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Jan 22, 2012. 1:38 PMsonofstone
says:
i would love to see you fabricating something like this, but made completely out of wood, 'cept for the metal parts of course, i'm building a revolver/flintlock pistol, the revolver drum is actually made from a weedgrinder, wich i glued tight, i'm gonna try and make the thing rotate, but first i've got to make the stock a little more gentle to my hands
Reply
 |
Add Comment
|
