Print PDF
Favorite
Email
Step 4Hinge, and ammo section
Ok, no we need to add the hinge, and the bulk that later makes up the radioactive shielding chamber.
Picture 1 - here we see the glueing of the hinge in place, again pva glue, or epoxy resin. I find the pva glue bond better with the card, so thats what i used. Tape into place until dry.
Pictures 2-5 - Show the build up of the ammo section. Again, using the same technique as before, i slowly built up two sides. Glue this into place with epoxy or pva, as long as you get plenty on the hinge it will hold no problems.
Picture 1 - here we see the glueing of the hinge in place, again pva glue, or epoxy resin. I find the pva glue bond better with the card, so thats what i used. Tape into place until dry.
Pictures 2-5 - Show the build up of the ammo section. Again, using the same technique as before, i slowly built up two sides. Glue this into place with epoxy or pva, as long as you get plenty on the hinge it will hold no problems.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
