With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
The Cyborg Heart in a Can is a good gift for Valentine's Day (Sorry, here use to be a romantic story about an ex-girlfriend, but now it's over, so I l...
MATERIALS: 1 heart shaped thing (I found a heart made of wood. It's Valentine's Time, so don't tell me you can't find a plastic or wood heart) 1 can ...
The heart had a hole in the center, so I dismantled the industrial switch and I install it. It will be the housing for the LED and the spring will be ...
Follow the circuit diagram for the electric part of this project.
To case the LED into the center, I used a wheel from a toy car. Then I glue it with superglue to the industrial switch.
Attach the eccentric weight to the motor, and fix it to the heart. Connect the motor wires to the LED (remember: red wire = +, black wire = -)
Attach the spring to the heart's back. Fix it with a screw.
I used the knob from the industrial switch (note the arrow) and some gears for a mechanical look.
Attach the spring to the cookies can. Use nuts, bolts and some metallic discs. Make a hole in the back of the can, for passing the wires to the outer...
Glue the switch to the can's border. What's the idea? The can's cap press the switch, the circuit is open and the heart is off. When you remove the ca...
Remove these ads by
Signing Up
Not NiceInappropriateSpam2,391 views
11 favorites
Posted:
Feb 19, 2012
License:
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »