Step 6: Robot Ears
The ear pieces were made with a long strip of plastic bent and fixed in place to create the top curve and a piece cut and fitted to the front, i used the modelling foam to make templates and then fitted the plastic around them.
Once the plastic ear pieces were put together i covered them with the chrome sheeting and siliconed them to the head, the were a pretty good fit, but i had a little trouble getting them on straight.
The waveform on the black disc was made from 2mm plasticard. I masked the shape on and then sprayed it black and then lacquered it.
Once the plastic ear pieces were put together i covered them with the chrome sheeting and siliconed them to the head, the were a pretty good fit, but i had a little trouble getting them on straight.
The waveform on the black disc was made from 2mm plasticard. I masked the shape on and then sprayed it black and then lacquered it.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
