Print PDF
Favorite
Email
Step 3Fabricate Top and Bottom Face Plates
With pencil and paper, place the gourd tops on the paper and trace around the circumference to make a pattern.
Transfer these patterns to a 1/4 inch wood.
Cut it out with a jigsaw.
Unfortunately the photo shows an incorrect template.
The hole for the meter had to be moved lower for clearance.
The correct location of the hole can be seen in other photos.
Transfer these patterns to a 1/4 inch wood.
Cut it out with a jigsaw.
Unfortunately the photo shows an incorrect template.
The hole for the meter had to be moved lower for clearance.
The correct location of the hole can be seen in other photos.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
