Introduction: DIY $10 IoT Based Home Automation

Picture of DIY $10 IoT Based Home Automation

Visit Steps2Make.com

IOT based home automation project is done using low cost ESP8266 ESPino ESP-12 WiFi Module, It uses relays and few simple components, complete code and pcb layout is provided, for more details on software setup go through iot getting started tutorial from top menu. You can control four electrical devices and also you can monitor temperature. ESP-12 is low cost module we are using here,

Step 1: Circuit Diagram

Picture of Circuit Diagram

IOT based home automation project is done using low cost ESP8266 ESPino ESP-12 WiFi Module, It uses relays and few simple components, complete code and pcb layout is provided, for more details on software setup go through iot getting started tutorial from top menu. You can control four electrical devices and also you can monitor temperature. ESP-12 is low cost module we are using here,

Components Required:

1. ESP-12 WiFi Module

2. LM1117-3.3V

3. Sugar Cube Relay - Qty.4

4. Resistors 10K, 1K,4.7K

5. Capacitor 1000uF, 10uF, 104 (0.1uF)

6. PBT-2 Connectors Qty. 5

7. ULN20038. 12V Power Supply

Step 2: Build PCB From Layout

Picture of Build PCB From Layout

Comments

About This Instructable

3,541views

70favorites

License:

Bio: Electronic store www.circuits4you.com Design Ideas blog.circuits4you.com Industry www.maventech.in Software fun www.360motions.com
More by Komal Manoj Thakur:Simple Wireless Remote for RobotDIY $10 IoT Based Home AutomationDIY Electronic Dice
Add instructable to: