Print PDF
Favorite
Email
Step 5Finish and Attach the Connector
Once the 3 connectors are finished, you might want to add heat shrink tubing or hot glue to insulate them from each other, because you'll be soldering the shielding/5 V points together.
For me, it was easiest to solder the two outermost connectors together and then add the third.
Once you've soldered the three connectors, add a fourth wire for supplying the shield/5 V.
For me, it was easiest to solder the two outermost connectors together and then add the third.
Once you've soldered the three connectors, add a fourth wire for supplying the shield/5 V.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Aug 30, 2011. 10:13 AMmrmerino
says:
left hand green.
Reply
 |
Add Comment
|
