Introduction: DIY 48V 1000W Rear Hub Motor 20" Electric Vehicle

Building a 20" steel frame foldable bike conversion into an electric vehicle.- 20" steel frame foldable bike.- 48V 1000W rear hub motor.- 48V 45A peak controller.- 13s15p 48V 42Ah 30A-60A bms DIY battery pack.- 48V-12V 10A max DC-DC converter.- Wireless 4 modules relays 20A max 12VDC 433Mhz.- 12V 5050 smd RGB led strips.- 15W (real) CREE led spot headlight 12V-80V- 10W 12V heater cards- 12V-5V DC-DC converter USB charging ports- 80mm anodized steel rim spokes- aluminum brake levers (regen brake activators)- Thumb throttle- 220N max german made bridles


Step 1:


Crazyhorse1234 (author)2016-01-20

Puede poner más fotos?

About This Instructable




Bio: We design and create batteries and electric vehicles. We research, develop and document our creations to inspire others.
More by EVMadrid:36V 32Ah Li-ion Battery for an Electric Longboard14V 7000mAh Li-ion Battery for DJI Phantom FC4090V 60W Solar Panel
Add instructable to: