With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
In this instructable i will show you how to make a hidden safe out of a large 6 volt battery. I will also show you how to make it give power to a ligh...
You will need: Gloves, there will be acid in the battery Tin Can Pliers Wire Strippers Large 6 volt battery ( dead ) Soldering Iron Solder Copper Alig...
Begin by using the metal sheers to cut away the top of the battery, be careful for sharp edges and acid.
Remove the battery contents by shaking it over a container, after emptied, rinse or wipe out the inside and the bottom of the cover.
Tape the edges of the top and the bottom with the tape you have. If you use electrical tape, skip to step 5 ( or step 6 in the corner ).
Time for childhood memories of mess and staying in the lines. Paint over the exposed tape in black, so it is the same as the top. wait for this to dry...
Cut a small strip of the tin can and bend it up, put this to the side.
Take the battery clip, strip about 1cm off each wire, and twist these into the holes in the aligator clips. Solder the connections, and clip to the bo...
Now take the tin can, tape the part you cut to the top of the battery, and tape the 9 volt to the side.
Now put the whole assembly into the battery housing, and put in the top level with the sides. Now you can hide valuables and money in your "safe". You...
This is a video of the safe, and how it looks.
This is NOT meant to be a super secret safe. To the casual observer it will look normal, but it is not the most secret, so don't post comments saying ...
Thank you for reading my instructable, please look at my other instructables, feel free to post any comments or suggestion, any tips will be appreciat...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »