Powerful Studio Lighting (DIY)

4,512

7

5

Posted

Introduction: Powerful Studio Lighting (DIY)

This box contains no less than 15X halogen bulbs, each burning 50W of power. When fully maxed out the box acts as a professional floodlamp due to its 750W output and its even distribution of light.
  • When running, the aproximate colour temperature is about 3300K but when used with filter sheets a range of effects can be achieved.
  • The the lights can be controlled by a TTL signal (+5v), audio signal or just at the wall. This allow you to use a DMX power outlet switch box and thus a DMX controller.
I used a sound to light module from Quasar electronics. com : Try Here   were all 15 bulbs are in parallel and are regulated by this product.

I have used my lighting in conjunction with an arduino controller board to hold a lighting sequence to match a song and it worked really well.

The video below is of my smoke bomb instructable, but I used this light during  it and ignore the camera flashes. 

SKIP TO 0:10, OK


Share

Recommendations

  • Remote Control Contest 2017

    Remote Control Contest 2017
  • Arduino Contest 2017

    Arduino Contest 2017
  • LED Contest 2017

    LED Contest 2017

We have a be nice policy.
Please be positive and constructive.

Tips

Questions & Answers

6 Comments

It's great that you have decided to share your photos with us, but we need an explanation of what you made and how you made it before it can be published. Please write up a short description of your project and reply to this comment to let me know that you are done.

Looks great! thank you for sharing this with ys!

You could set your ipod to go off at time, this would be one heck of an alarm clock

I hope that you do not have epileptic tendencies. Good job.