Print PDF
Favorite
Email
Step 2Making plywood ring
A: Saw a straight hole through the plywood using the 9.5 cm (3.7 inch) hole saw.
B: Then saw a hole through the middle of this disc using the 4 cm (1.5 inch). Ensure that you have a slightly smaller hole than the PVC tube's diameter (not too big).
B: Then saw a hole through the middle of this disc using the 4 cm (1.5 inch). Ensure that you have a slightly smaller hole than the PVC tube's diameter (not too big).
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
