Print PDF
Favorite
Email
Step 2Attach the legs
You can't just screw the legs into the chest because then, of course, the bottom drawer wouldn't open. So get a piece of hardwood cut to the size of the fira chest, or just a smidge smaller. A friendly worker at Home Depot cut ours. Use generous amounts of wood glue to adhere the wood to the bottom of the chest, then hammer small nails along the edge. Screw the metal plates into the wood at the four corners.
Now you can screw the legs in (and off should you need to move it).
Now you can screw the legs in (and off should you need to move it).
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
