Introduction: DIY Arduino Scrolling LCD Text Shield

Picture of DIY Arduino Scrolling LCD Text Shield

This project is an upgrade on my "DIY Arduino LCD shield" go check out how to make it on my channel!

In this project I’m going to use an Arduino Uno to scroll some text on a 16×2 character LCD which is controlled with a pair of pushbuttons. The project can easily be extended to do more, like add to more pushbuttons to go up, down, left and right maybe.

PARTS USED:

Arduino Uno

16×2 LCD

Arduino UNO prototyping PCB

10K potentiometer

2x pushbuttons

3/5mm LED

2x 10kΩ resistors

2x 220Ω resistors

jumper wires (male-male)

Step 1: Soldier the Parts

Picture of Soldier the Parts

The wiring for the LCD is pretty standard, the same you can find in many project using an LCD.

Step 2: The Sketch

Upload the sketch and edit it the way you want it and what you want to be written on the LCD

please check out my other projects :)

If you have made this please comment and send a photo it will mean a lot for me!

Thanks for watching :)

Comments

Fission Chips (author)2014-10-23

Awesome project! Good job being a young maker who is actually smart. I am too! Just my two cents: You might want to correct the text on step to from 'Soldier' to 'Solder'.

ibenkos (author)Fission Chips2014-10-25

thank you :D

seamster (author)2014-10-23

Hey, this is cool. Nice work!

ibenkos (author)seamster2014-10-23

Thanks :)

About This Instructable

7,200views

67favorites

License:

Bio: I am always making electronic stuff. I like to do Arduino projects best. more projects coming soon!
More by ibenkos:433MHz 4Ch Remote ControllerWireless Robotic Control Hack a servo
Add instructable to: