Print PDF
Favorite
Email
Step 5Cut a bracket
Laser cut your bracket using the file below.
If you don't have a laser cutter you can print out the file below and use it as a stencil for sawing and drilling.
If you don't want to do that, you can use 10 washers by placing one on the inside and outside of each hole and fastening the jack through them.
If you don't have a laser cutter you can print out the file below and use it as a stencil for sawing and drilling.
If you don't want to do that, you can use 10 washers by placing one on the inside and outside of each hole and fastening the jack through them.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
