Instructables
Picture of DIY, BUILD YOUR OWN DIGITAL BINARY CLOCK!!!
This Instructable shows how to build a digital clock in the simplest way. You only need a few tools and a little time ...

Step 1: Introduction

Picture of Introduction
There are two ways to build your own binary clock.
1.- One is to make your own PCB. Learning a bit of micro controllers. Have a micro recorder. Some experience in electronics and putting hands to work.
2.- But. If you like electronics and you do not have time for all of the above can use this instructable. Just go to ebay purchase a kit of construction and welded parts.

This KIY is designed for people with little or no experience on electronics. Who want to start in this world.

There is the ebay place: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MESELX:IT&item=250375293631

Step 2:

Picture of
After ordering. It is only necessary to have some tools and a little time and your watch will be ready.
 
Remove these adsRemove these ads by Signing Up
phoenixivan5 years ago
tell how to set the component and how to program this thing
jrubiogtz (author) 5 years ago
This looks like a wonderfully friendly kit. But, what if we really want to do it ourselves? Where can we get a real parts list and instructions on how you programmed the chip?
jrubiogtz (author)  noob_for_life5 years ago
I will put all the code and full instructable soon.