Print PDF
Favorite
Email
Step 4Draw the languet, and start to dig.
Well it's time to take a pencil and do the most important step of this instrucable, drawing the languet.
Firstly, some explanation about the languet, it's compose by two parts, the first one is really slim, this part is attached at the frame. The second part is bigger, it permit to do vibrate the languet.
So you have to draw all your marks, the languet have to be like 1 cm width, and separe the two part more or less in the middle.
After you have to begin to dig, first follow the line of your frame with your knife, and cut very well when it's perpendicular at the fiber's sens, and after, digging, you can cut in V, or use scisors wood, but dig only the fist part, slim one.
Firstly, some explanation about the languet, it's compose by two parts, the first one is really slim, this part is attached at the frame. The second part is bigger, it permit to do vibrate the languet.
So you have to draw all your marks, the languet have to be like 1 cm width, and separe the two part more or less in the middle.
After you have to begin to dig, first follow the line of your frame with your knife, and cut very well when it's perpendicular at the fiber's sens, and after, digging, you can cut in V, or use scisors wood, but dig only the fist part, slim one.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
