Print PDF
Favorite
Email
Step 5Sanding and cutting the languet.
Well now you have the form of your languet, you can sand it little bit to make it nice, and after you have to cut it to separe it of the frame. You can just use your knife, or if you have, exacto, but be careful !
_don't cut every things, let the little-slim side atached at the frame.
_put tape at the extremity, your bamboo can explose when you cut the languet.
When it's separate, sand the beetween the languet and the frame, to have 1/2 mm of space.
_don't cut every things, let the little-slim side atached at the frame.
_put tape at the extremity, your bamboo can explose when you cut the languet.
When it's separate, sand the beetween the languet and the frame, to have 1/2 mm of space.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Aug 17, 2009. 6:34 PMbushkiwi
says:
Thank you for sharing this! It sounds Great! I am going to have a go at making some with my 4 home-schooled children!! : )
Reply
 |
Add Comment
|
