Print PDF
Favorite
Email
Step 3Building the Base - Step 2
That's it! There's your completed stand!
Just kidding. That'd be lame. That would also mean each piece cost about ten dollars. A bit of a ripoff if you ask me.
Grab the two (2) 18" lengths of pipe and two (2) 90 degree elbows. Thread and hand tighten an elbow onto the end of one of the lengths of pipe. Once joined, set that contraption to the side and do the same thing to the other elbow and pipe. These can now be used as sweet weapons. No, put them down. NO, don't hit the cat! Jeez.
Just kidding. That'd be lame. That would also mean each piece cost about ten dollars. A bit of a ripoff if you ask me.
Grab the two (2) 18" lengths of pipe and two (2) 90 degree elbows. Thread and hand tighten an elbow onto the end of one of the lengths of pipe. Once joined, set that contraption to the side and do the same thing to the other elbow and pipe. These can now be used as sweet weapons. No, put them down. NO, don't hit the cat! Jeez.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
