loading

Step 5: Finishing the Grip

Picture of Finishing the Grip
2012-11-10_13-37-50_838.jpg
2012-11-10_13-38-08_579.jpg
2012-11-10_13-41-55_342.jpg
2012-11-10_13-42-13_938.jpg
-Pull the longer side of the tube around the bar making sure it is tight.
-Tape the edge down.
-Get rid of any wrinkles by stretching the rubber or by letting some of the pressure off.
-Finish wrapping the end of the tube. (This doesn't secure it any more it just makes it look cleaner.)