Introduction: DIY Box for Storing Electronic Componenets

Simple Box for storing electroinc components.

Step 1: Equipments

Two different sized boxes
cutter ,and some glue

Step 2:

Cut the top of the smaller box to fit in to the large box. And cut all the sides of the box.

Step 3:

Make marks on the board and cut it into pieces. we can make any type of slots but in this project i made some slides to insert the smaller slots. That you see in the video.

Comments

author
tonydaal (author)2016-01-24

Thank you for 1k + views and 26+ favourites