Step 3: PLACE RUBBERS RINGS
1-cut bicycle inner tube in rings, NOT TOO THIN.
2-put two sticks together, wrap around one edge a ring of inner tube, REALLY FIRM. (see picture).
3-wrap another ring in the middle of the 2 sticks, firm, but not too too tight (so it will allowed clothes to fit between the 2 stick).
DONE!
2-put two sticks together, wrap around one edge a ring of inner tube, REALLY FIRM. (see picture).
3-wrap another ring in the middle of the 2 sticks, firm, but not too too tight (so it will allowed clothes to fit between the 2 stick).
DONE!
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
