With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
For more Info visit us at cncsnap.com I have always dreamed of having a CNC and window shopped all the time on the internet. Finally, I discovered In...
You will construct the X axis with plywood. It's just a box. You will need to cut out these pieces two 8 1/4 x 2 1/2" one 10 x 2 1/2" one 8 x 1 1/2 x ...
Use Gorilla Glue on the corner. Gorilla Glue expands 3x it's size so apply sparingly. Clamp down the PVC pipe and let dry overnight.
You need to cut out the following plywood pieces for the Z axis: one 3 1/2 x 5" one 4 1/4 x 3 1/2" one 4 1/2 x 2 1/2"
Cut two PVC pipes to 8 1/4". On the elbow there will be a crease, draw a pencil mark. Measure the 3/4" from the top and you will have your center-poin...
The table is 8 x 7 3/4". Screw the table to the PVC pipe. Make sure everything is square. Do not glue PVC pipes together just yet. Make sure everythin...
When installing lead screw, you have to notch out the PVC pipe. Use pipe hanger to hold the nut.
Installing the shaft in this step. There's no right or wrong way to do this. It's just the way I did it. As long as everything is square. Meas...
I cut and glued four pieces of craft foam to the bottom.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »