OPENSOURCE NEMA 17 MOTOR MOUNT

Hopefully this NEMA 17 mount helps your diy projects.

.svg - http://cncsnap.com/node/160

Remove these ads by Signing Up

planecaptain says: May 18, 2011. 5:35 PM

I'm right in the middle of this project, however the software directions are not showing up on my computer. Has this been pulled off for some reason?

Feature Comment

CNCSnap in reply to planecaptainMay 18, 2011. 8:40 PM

I'm sorry but I'm taking my instructions somewhere that won't be censored.

pruven in reply to CNCSnapJun 19, 2011. 8:03 AM

and where would that be

edward.ford in reply to CNCSnapMay 25, 2011. 8:55 PM

Don't try and take the high road. You took your instructions down because you're trying to monetize the process through your kickstarter project. Which is ironic, considering it's open source software that you were doing an instructable for.

Apparently you only support being "open" when it's other peoples work. Classy.

planecaptain in reply to CNCSnapMay 19, 2011. 2:18 AM

I understand. Anyway you can let me know where I can find those software steps. I just finished my soldering last night,and the z axis is at last complete.

The nerdling says: May 26, 2011. 4:53 PM

where is everything?

Feature Comment

bears0 says: May 11, 2011. 6:03 AM

i dont think id want software where they spelled compatible wrong. lol

Feature Comment

dr.knowitall says: May 4, 2011. 12:11 AM

I'm still new to the Arduino scene, so excuse me for what may be a stupid question. I'm curious to know though, once you have the Grbl sketch uploaded, do you use the same FTDI cable or breakout board to communicate to the Grbl sketch from the PC in order to parse the Gcode information? I'm just really confused about what's happening here.

Thanks.

Feature Comment

CNCSnap in reply to dr.knowitallMay 4, 2011. 7:11 PM

A FTDI cable and breakout board wasn't used, just a regular (Type A to B) USB from the PC to Arduino. You use the Uploader to get the GRBL .hex file into your Arduino. Then to get the gcode to your Arduino, use gcode sender and upload your gcode file.If you have anymore ?'s, I'd be happy to help.

mossDboss says: Apr 13, 2011. 10:57 PM

will this do 2D and 3D or just 2D?

Feature Comment

CNCSnap in reply to mossDbossApr 14, 2011. 1:34 AM

2D Phlatboyz only has basic tool path. I'm looking in to CamBam CNC and others for my 3D projects.

louis.kli in reply to CNCSnapApr 20, 2011. 6:51 PM

Will you be adding instructions on how to do 3d?

CNCSnap in reply to louis.kliApr 21, 2011. 6:22 PM

Yes of course.

wizart_dk says: Apr 18, 2011. 3:24 AM

Hi All :)

I 'm trying to get the uploader to work, but it tells me that "not sync" and just says error.

Do i need to build a bootloader cable ? or what do i do wrong :)

I have
Arduino Duemilanove 328p
Easydriver.
USB cable

kind regards
Carsten

Feature Comment

CNCSnap in reply to wizart_dkApr 18, 2011. 4:12 AM

I can recreate the error when I don't select the right COM port or when I don't delete the -b19200. Have you done those things?

wizart_dk in reply to CNCSnapApr 18, 2011. 5:26 AM

yes :)

I have work with Arduino i a bit, and can load LED flash in to it, so i must have the right COM, and i have removet -b 19000. but stille the same problem :)

any ideer ? :)

thx for the quick respons.

CNCSnap in reply to wizart_dkApr 18, 2011. 6:13 PM

Try X LOADER It might work better with the Duemilanove.

wizart_dk in reply to CNCSnapApr 18, 2011. 11:30 PM

YES :) thx thats works.