Introduction: DIY Chevron Friendship Bracelet
It's time to make a friendship bracelet! The chevron design! My favorite design! If you want to learn how to make a candy stripe design, check out my candy stripe instructable!
Supplies
Embroidery floss (4 colors)
Clipboard
Scissors
Button
Step 1: Set Up
Set up your layout like the picture. You don't have to use the same colors set up your colors in order.
Step 2: Knotting Forward
Do all forward knots on the left side. Once you get to the middle stop. Do all forward knots on all, do I twice on each.
Step 3: Knotting on the Right
Now when your done switch to the right side. DO NOT do forward not. It is pretty much the same thing but a backwards four. Do this twice on each. Until you get to the middle with the left side same color.
Step 4: Middle Knot
Once you get to the middle, take the right side sting and do a twice backwards knot on the right, when your done switch strings.
Step 5: Continue and Knot
Then continue those same steps with the others colors. After you have reach your point make a knot.
Step 6: Buttoning and Done
After you have made the knot take you button and put the strings in the holes and make a knot.
And you are finished!!
Please follow like and comment!!
Step 7: Extra
If you want me to show more bracelets to make, comment below!! Please follow and like, also follow me on Instagram! Username: CinCoCaLa08