Print PDF
Favorite
Email
Step 3Mechanical Relay Pack
Heres a picture of how I wired the relay pack. You can put them on a board if you want. I used CAT5 wire for all low voltage circuits and 12GA wire for the 110V applications. I recommend hot gluing all wires together to keep them from bending or breaking.
| « Previous Step | Download PDFView All Steps | Next Step » |
2
comments
|
Add Comment
|
Mar 27, 2009. 9:26 AMBlackHatCracker
says:
Considering the size of Rly 1-16, is it possible to mount them with the controller board in the same box or need a seperate box to put them in with the board. Considering the size of the stand offs that would be used, and the possible placement, maybe a larger box be used? I am asking since I am considering making this project, and I am looking at what I am going to get into price wise. Thanks! Love the light show..
Reply
12
Apr 1, 2009. 9:24 PMprabbit22m (author)
says:
Everything fit in the box I made. In fact, there was pleanty of extra room. I would recomment mounting the relays on a board, thay will be much more secure that way. I didn't run into any problems but I was delicate with the box. Had I dropped it there might have been a damaged connection.
Reply
 |
Add Comment
|
