Step 3: Welding the Base

Once the steel is all prepped it was time for welding. I have a small arc welder which was perfect for this project. I used my angle and clamps to make sure I was getting a 90 degree angle. Then welded everything together.
I like it. Wouldn't this scratch the floor if it was on hardwood instead of carpet?
It sure would. But if you can drill into the metal to attach the top with screws, you can get little screw on rubberized feet to attach to the bottom and save your floor.
That's gorgeous!
That's gorgeous!

About This Instructable


176 favorites


More by rfalcon12: DIY Coffee Table DIY 2-Tier Coffee Table
Add instructable to: