With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
share what you made with text, photos, video, and files
gather your favorite instructables together
Some backstory: I recently got a 2.5' millenium falcon gift that I subsequently hung in my office... Well, I got a small wall decal of the death sta...
So to start off with, I resized and printed out an internet photo of the death star. Using the carbon paper, I traced the outlines onto the frisbee.
(side note: if I were to do this again, I would next use my dremel tool and sand away the "emitter / focusing disc" portion as well as dremel in the ...
Next, I used that same printout photo and traced the outlines onto a sheet of the adhesive backed white foam sheet. Using a scalpel / X-acto knife, I...
then spray painted the whole thing in semi gloss black (but any black will work I think) - paint was still wet in this image. The textural difference...
I used a strip of 1/4" tape to mask the center groove / canyon area, then lightly misted some gray primer to highlight some of the areas and provide c...
I then drilled a small hole for the clock nubbin to stick through and attached the clock arms. Here it is mounted next to my shop clock for comparison...
total cost: about $38-39 and the final result hanging in my office next to the falcon and TIE fighter:
We have a be nice comment policy. Please be positive and constructive.
Death Star DIY Paper Lanternby paperlanternstore
Death Star Painted Ball Toss Gameby DeandrasCrafts
Death Star Ornament inspired by Star Warsby mstyle183
My Son's Interchangeable Lego Star Wars Clockby YOUgNeek
DIY Death Star Candy Dispenserby Nerd Builds
"The Death Star" Pumpkinby UrbanNinjaOokami
DIY Star Wars T-Shirt Stencilsby gentryaustin
Death Star Dessertby kristylynn84
Levitating Death Starby backwards lamb
Millennium Falcon for the Futureby DanielSims
Download our new apps for iOS, Android and Windows 8!
© 2015 Autodesk, Inc.
By clicking "Create Account" you are indicating that you have read and agree to the Terms of service.
Already a member? Login »
Enter the email associated with your account and we will send you your username and a temporary password.
Not a member? Sign Up »