With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
I don't like to throw away any scrap supawood or MDF that I have lying around, and since I use so much for projects on Home-Dzine.co.za. there is alwa...
Find a nice design that you like, or freehand your design, and transfer this onto your supawood/MDF.
Clamp the board securely to a workbench so that it doesn't move around when you cut from the outside in. A thin jigsaw blade - or fretsaw blade - is ...
Use sanding paper to smooth away any cutting defect as these will show up once you paint.
I used Rust-Oleum 2X spray paint in satin blossom white to spray the front and back sections. Also note that the front and back sections are two diff...
In the side that you want for the front, drill a hole for the clock hands. I'm not going to tell you what size to drill, as clock movements and hands...
Attach the clock movement and hands to the drilled front panel. I used a strip of double-sided tape to attach the back, so that it can be pulled apar...
And there you have it - the perfect gift for family and friends - or for you own home. Make a few and then paint in different colours.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »