Print PDF
Favorite
Email
Step 8Base Installation
Now we need to mount the base. This step will be the same whether you've chosen to go with the permanent or temporary version.
Set the base where you want to mount it and mark the positions of the holes. (Picture 1)
Next drill pilot holes for your screws. (Picture 2)
Then drive in the screws. You may want to use washers for a more secure mount. (Picture 3)
Set the base where you want to mount it and mark the positions of the holes. (Picture 1)
Next drill pilot holes for your screws. (Picture 2)
Then drive in the screws. You may want to use washers for a more secure mount. (Picture 3)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
