Introduction: DIY Duck Tape Cuffs
Hey y'all so today I'm gonna show you how to make Duck Tape Cuffs.
--> Duck Tape
--> Pieces of velcro
Let's get started
Step 1: Cut Off a Piece of Duck Tape
You want this piece to be about 20 cms or enough to wrap around your wrist. So carefully cut off a piece of duck tape from the roll and be careful when cutting duck tape as it is sticky. Once you cut off this piece place it down on a flat surface.
Step 2: Repeat
Cut off another piece of duck tape the same size (as accurately as possible).
Step 3: Layer
Layer this new piece of duck tape on top of the previous strip of duck tape, and firmly press down to smoothen out the piece and make it stick better. Be careful not to get to many ridges while doing this.
Step 4: Perfection
You want this piece to look nice as you wrap it around you wrist so cut off any uneven parts and make it flat. Once your finished mark where your wrist end on both sides of the piece.
Step 5: Add Velcro
Add velcro on one side of the piece towards the point where your wrist ends. Then flip over the piece and place a piece of velcro on the end.
Step 6: Finishing Touch
Put on the cuff and then see how much excess tape is left. Cut this off and then your done. :)
We have a be nice policy.
Please be positive and constructive.