Print PDF
Favorite
Email
Step 1135mm Piezo Sensor
35mm Piezo Sensor is attached with double sided foam tape. The Piezo Sensor is connected to the 1/4 Jack.
| « Previous Step | Download PDFView All Steps | Next Step » |
3
comments
|
Add Comment
|
Aug 6, 2009. 7:15 AMtommah04
says:
when I made a few and hooked them up I was getting ALOT of crosstalk, any tips (besides messing with the module) I could do to help this?
Reply
3
Aug 6, 2009. 11:09 AMmikejl47 (author)
says:
The only other way is to isolate the drums on the rack as much as you can. The best way is use the crosstalk settings on the module. I know the cross talk settings on the Roland modules work very well for fixing that problem.
Reply
May 26, 2008. 2:59 AMRockmanAU
says:
Yo, Could you give me an idea of what these sensors cost you, what type/model/specs they are & where you got 'em please? Thank you Mike, Rock
Reply
3
May 26, 2008. 5:43 AMmikejl47 (author)
says:
I use piezos purchased here
Reply
 |
Add Comment
|
