Introduction: D.I.Y Favor Box

Here is another Laser Cut By the Sheet D.I.Y project! All you have to do is choose your own design (offered through our website), follow these simple steps, and enjoy yourself! This D.I.Y Favor Box is designed to compliment any special occasion!

Step 1: Supplies You Will Need:

  • Laser Cut Sheet
  • Translucent candy bag
  • Treats to put inside the candy bag
  • Ruler
  • Scissors
  • Glue or StaplerRibbon

Step 2: Step 1: Pick Your Sheet

Start with our 10" x 13" Laser Cut Sheet. Chose your own design out of the 5 varieties offered at http://paperorchid.com/

Step 3: Step 2: Cut Laser Cut Sheet With the Dimensions Below

Cut along the 13"length, removing the excess stock to the right. Then, measure 3" to the right, and cut along the 13"length.

Step 4: Step 3: Now, Cut a 7 1/2" X 3" Strip.

Step 5: Step 4: Here Are the Laser Cut Sheet Folding Dimensions.

Step 6: Step 5: Fold Your Laser Cut Sheet to Mimic This Display.

Step 7: Step 6: Trim Favor Bag.

Step 8: Step 7: Place Favor Bag Inside the Already Folded Laser Cut Sheet.

Step 9: Step 8: Staple/Glue the Favor Box to Ensure It's Secured

Step 10: Step 9: Show Your Personal Style by Adding a Bow!

Step 11: Here Is Your Finished Favor Box, Available in Different Designs to Fit Any Celebration!

Comments

author
Swansong (author)2016-11-29

These are very pretty :)

About This Instructable

170views

5favorites

Bio: Known for our exquisite laser cut wedding and special event products! You can always expect the unexpected from Paper Orchid! http://paperorchid.com/
More by Paper Orchid:D.I.Y Favor Box
Add instructable to: