Instructables

Step 2:

Picture of
Step Two:
Clamp or secure your two pieces together. Make sure the pieces are back to back with the finished side (the side with the pretty edging) facing out. Be careful when selecting your drill bit. I put my bolts up to the drill bit to make sure they were about the same size. When in doubt, start small and increase the drill bit size as needed. You can always make bigger, but you can’t make it smaller.
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!