Introduction: DIY Foam Brush
Hello, if you want this is the video how a made my foam brush, or check it out the step by step. Thank you.
Step 1: What You Will Need
In this project i used a piece of scrap wood, paper clamp and a kitchen sponge (foam)
Step 2: Drilling
Drill a hole in the paper clamp, and one on the scrap wood.
Step 3: Screw
Then screw the paper clamp and scrap wood together (sorry for this bad photos)
Step 4: Cut Foam
Cut the foam any shape you like.
Step 5: Clamp and Use It
Now just clamp the foam and use it.
Thank you very much!
If you like please visit my YouTube channel to see more: https://www.youtube.com/c/woodandbeer1
We have a be nice policy.
Please be positive and constructive.