With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
With Occupy protests around the country, things are heating up. With disbursement of tear gas an pepper spray by police, how are regular people able t...
The idea came from this pamphlet that has no author. I figured to make an instructable about it to not only tell others about it but to get constructi...
For this project you will need the following: - a 2 liter soda bottle - a n95 rated face mask that is good for particulates. Tear gas is a dust, not a...
The first step is to mark your bottle and cut it. I used a sharpie to mark the bottom off and the dip the bottle takes to fit to your face. I then too...
For this to work, you have to create a seal on your face with the bottle. i created this seal with a bit of gorilla tape around the edges. Wrap the ta...
Pull off both of the yellow straps from the facemask (SAVE THEM!) to have a strapless mask. From here you can just stuff it into the bottle.
You could stop here if you just wanted something you could hold to your face, but if you want hands-free operation, you can reuse the yellow straps an...
Now you can run around in the tear gas a little easier, just slide the mask over your face, make sure the straps are tight and you're ready to go. If...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
xenobiologista
says:
Nov 14, 2011. 6:07 AMReply
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »