Introduction: DIY Glowing Pen Stand

Picture of DIY Glowing Pen Stand

Hi there! here is a pen stand!

Step 1: Gather the Materials!

Picture of Gather the Materials!

A4 sheets

Scissors

Glue

Paper cutter

And you are ready to go!

Step 2: Cutting Out the Strips!

Picture of Cutting Out the Strips!

Now cut Thin strips of A4 sheets, about 1cm wide and start rolling the paper to make circular designs.

Cut some strips in black colour and the others in black.

Step 3: Its Rolling Time!

Picture of Its Rolling Time!

Now gently start rolling the strips to form circular patterns.

Make about 20 to 30 of these to build an awesome holder.

Step 4: Glue Them Together!

Picture of Glue Them Together!

Glue the paper rolls to each other is a specific pattern to form a layer.

Make a few layers of these and stick them together. And its almost done!

Step 5: Adding the Light

Picture of Adding the Light

Add an led to the base of the holder. Here I have used an 1watt cool white led. Now connect the led to a dc power source or a 3v battery.

Ah! it done! enjoy it!

Comments

About This Instructable

363views

1favorite

License:

More by Rapatil:Flying CarDIY Glowing Pen Stand Paper RC plane
Add instructable to: