DIY HID Flashlight for your car/truck

 by photemis
Featured

Step 9: Powering the flashlight

cigparts1.jpg
cigwires.jpg
Take the cigarette plug that came with the flashlight and take it apart, removing the wiring and rubber piece at the base. (Remember where the wires were soldered to)

Cut off and strip the other end of power cord as shown. (The black wire shorter than the white)
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!