Introduction: DIY HOW TO MAKE a BLUETOOTH CONTROL ROBOT (WITH APP AND CODE)

this project based on Bluetooth ...is totally automated and user friendly ...this project just cost around 3000 to 5000 ....based on the quality of products which we use in the model ....

it's easy and fun to play with ARDUINO and controllers ....for making robots and stuffs

this model has lot of mobile applications filled with lot of ideas .....

Step 1: GET ALL THE COMPONENTS

I HAVE PROVIDED ALL THE LINKS TO BUY THE COMPONENTS

CHASIS http://amzn.to/2jCWoEL

WHEELS http://amzn.to/2B4EN2w

ARDUINO UNO/NANO http://amzn.to/2B6UKoM

BLUETOOTH MODULE HC05 http://amzn.to/2yaB8dR

BREAD BOARD http://amzn.to/2yachqQ

4V LEAD ACID BATTERY *3 http://amzn.to/2kdY0EF

L298N MOTOR DRIVER http://amzn.to/2kgh3xN

MOBILE APP

MIT APP INVENTOR

CONNECTING WIRES http://amzn.to/2B3nejk

Step 2:

Picture of

MAKE THE 3 LEAD ACID BATTERY AS 12V BY MAKING IT INTO SERIES CONNECTION

IN THE ABOVE IMAGE I HAVE ATTACHED 2 6V BATTERY ... U CAN ALSO MAKE 3 4V BATTERIES INTO 12V

Step 3: CHECK FOR THE CONNECTIONS

Picture of CHECK FOR THE CONNECTIONS

THE ABOVE MENTIONED CONNECTION WILL BE SAME ENOUGH JUST WILL BE CHANGED BY THE ARDUINO CODES LIKE CHANGE IN DIGITAL PINS .....

Step 4: FINALLY DOWNLOAD THE CODE AND APP

THE CODE AND APP WORKS PERFECTLY WITHOUT NO ISSUES

Step 5: CHECK MY YOUTUBE VIDEO FOR MORE CLARITY

Comments

About This Instructable

229views

1favorite

License:

Bio: electronics and technology
More by xplorelabs:DIY RACING ROBOT USING DPDTDIY HOW TO MAKE a BLUETOOTH CONTROL ROBOT (WITH APP AND CODE)CELL PHONE DETECTOR
Add instructable to: