Introduction: DIY Haunted House

Picture of DIY Haunted House

This Haunted House was created using a kit from SVG Cuts.
It has two areas for storing surprises or treats. The roof in the front lifts off to reveal a storage space. The back opens down to fill with lots of fun things.
I started by cutting all the pieces. I embossed panels in the front for added texture.
I distressed all the pieces with Tsukineko pigment inks.
I added some additional distressing with white paint.
I filled it with my favorite candies.


Comments

sunshiine (author)2014-02-27

I like this one also but my favorite is the castle. thanks again for sharing!

sunshiine

JavaJoan1 (author)2014-02-26

Another wonderful project!! Your work is so detailed and nicely done!

About This Instructable

1,261views

25favorites

License:

More by alliegower:T.A.R.D.I.S. Paper PiecingPaper Guitar Gift BoxDIY Haunted House
Add instructable to: