DIY High-Speed Book Scanner from Trash and Cheap Cameras

FeaturedContest Winner

Step 40: Video Switch: Solder all grounds together.

Connect all grounds/shields together. The two input grounds and the output ground should be soldered together. I found the grounds by touching my multimeter to the shield of each jack and to pins on the board until I found a connection. After soldering all the ground wires together, I applied heat shrink tubing for durability.

Remove these adsRemove these ads by Signing Up

Get More Out of Instructables

Already have an Account?


PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!