DIY High-Speed Book Scanner from Trash and Cheap Cameras

FeaturedContest Winner

Step 45: Display Systems: Solder it in.

Picture of Display Systems: Solder it in.
Solder an RCA jack to the cable you just cut. Typically the center conductor is the video signal and the woven wire shield is the ground.
Remove these adsRemove these ads by Signing Up
hyperdyne4 years ago
pffft BLANK heatshrink.. i use electrical tape like it was my third hand. ;)

Get More Out of Instructables

Already have an Account?


PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!