Instructables

DIY High-Speed Book Scanner from Trash and Cheap Cameras

FeaturedContest Winner

Step 66: Handle/Electronics: Mechanicals 1.

Picture of Handle/Electronics: Mechanicals 1.
HANDLES_0005_Layer 8.jpg
Returning to the other side of the flashlight, assemble the threaded rod, washer, and junk as shown.

The idea here is glue the rod into the center of the flashlight, so it comes out the left side. It does not need to spin- quite the opposite. Once you have your assembly ready, push it into the flashlight and fix it in place with a lot of hot glue. Don't be shy with it. I happened to have some nice black plastic that sealed the end, but you could use another washer or nothing at all.
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!