DIY High-Speed Book Scanner from Trash and Cheap Cameras

 by daniel_reetz
Contest WinnerFeatured

Step 76: SETUP AND OPERATION BABY

MODE_dIAL_IMG_1266.jpg
CAMERA_SETTINGS_IMG_1266.jpg
You need to put the cameras in Manual Mode by switching the Mode Dial to "'M'".

Set the aperture to F8.

Set the shutter to 1/50 of a second or faster.

Set the White Balance to "Tungsten".

Set the Quality to Superfine and the Resolution to Large.

Your cameras are ready. If you keep them in "M" mode they will retain these settings.
 
Remove these adsRemove these ads by Signing Up
AutumnJazz says: Jun 4, 2009. 6:56 PM
1/50 and f/8 won't always result in the same exposure if different lighting is used, or if the book is really glossy.
daniel_reetz (author) in reply to AutumnJazzJun 5, 2009. 11:46 AM
That's true, but it's obvious and not a problem. I suspect people can figure out how to set different shutter speeds if they don't use the bulbs I recommend. Gloss has little to do with exposure. However, pages which are mostly white will indeed shift the exposure meter reading up.
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!