Introduction: DIY Hovercraft Toy (using a CD)

Build your own toy hovercraft using a compact disc and a balloon. Pretty simple !

Video Tutorial on Youtube

WATCH HERE : DIY Hovercraft Toy (using a CD)


Hovercraft use blowers to produce a large volume of air below the hull that is slightly above atmospheric pressure. The pressure difference between the higher pressure air below the hull and lower pressure ambient air above it produces lift, which causes the hull to float above the running surface.
For stability reasons, the air is typically blown through slots or holes around the outside of a disk or oval shaped platform, giving most hovercraft a characteristic rounded-rectangle shape.


My Facebook-Fanpage !
https://www.facebook.com/ehlerstv


Follow me on Twitter:
https://twitter.com/Ehlers_TV

Step 1: You Need:

- a CD (Compact Disc)

- a pin

- a plastic bottle cap

- a balloon

and HOT GLUE

Step 2: The Pin

Make some "air-holes" into the bottle cap....

Step 3: The Bottle Cap

Take the bottle cap and put it in the middle of the CD ( over the hole)...

...stick firmly around the cap using hot glue....

Step 4: Balloon

Take a balloon, blow it up..twist the end (airtight) and put it over the bottle cap.....

Step 5: PARTY HARD !

Let's go !!

Please watch the video to see him DANCE :-D

WATCH HERE: DIY Hovercraft Toy (using a CD)

Comments

author
Fathomlis (author)2016-03-02

Cool.

About This Instructable

974views

17favorites

Bio: The best Lifehacks and Tutorials on YouTube
More by Ehlers_TV:Fidget Spinner (using Bike Chain) in 90 Seconds - DIYSpraying Faucet LifehackNapkin Christmas Tree
Add instructable to: