Introduction: DIY How to Install Bulk Human and Synthetic Hair With Linkies

Ready to learn how to add highlights, length, or thickness with bulk hair? Doc will teach you how to get your extension on in this video!

For this tutorial you will need:

Follow along in the video for step-by-step instruction!

Step 1: Section

Picture of Section

Gather your supplies and place Linkies onto the microneedle. Pick up a section of natural hair with the microneedle, and slide the ring onto the natural hair.

Step 2: Loop Hair

Picture of Loop Hair

Human Hair: Bend the top of the human hair over just enough to create a loop, insert the microneedle down through the Link, and pick up the extension hair at the fold.

Synthetic Hair: Fold the synthetic hair in half, insert the microneedle down through the Link, and pick up the synthetic hair at the fold.

Step 3: Secure Linkies

Picture of Secure Linkies

Pull the extension hair into the Link, leaving the loop exposed at the top. Using your closer tool, position your ring into place and close down on the ring. Continue this process until you have completed your style.

Step 4: Removal

Picture of Removal

1. Slide a closed Link into the opener tool.

2. Apply pressure and the ring pops open.

Comments

About This Instructable

173views

2favorites

License:

Bio: Hello Instructable World! We're people that specialize in all things hair (namely extensions). From clip-ins to dreadlocks to braiding, we'll show you how ... More »
More by Doctored Locks :How to Seal: Stage 2 of Creating Synth DreadlocksHow to Backcomb: Stage 1 for Creating Synthetic DreadlocksHow to Cover a Bald Spot
Add instructable to: