Introduction: DIY Hydroponics Top Drip Bucket System

This is a DIY Hydroponics Top Drip Bucket System that I will show you step by step how to build. This System is great for larger plants like hydroponic tomatoes and peppers. I am currently growing champion tomatoes and jalapeno peppers in 2 of these systems. Check out my blog if you would like to see the progress www.getforked.ca


Comments

wold630 (author)2016-07-15

Looks like your intro image is missing. :\

evandromiami made it! (author)2016-06-12

I like the humidity dome idea to help with humidity during early stage

EmilyA29 (author)2016-03-31

How much did this cost you to setup aprox?

jallen50 (author)2012-12-31

any advice on a good solution mixture?

wagman45 (author)2012-09-05

hey! so i got that same little lid with a 3 gallon bucket. could i possibly put a couple pepper plants in the single cup? or just strictly one plant?

Get Forked (author)wagman452012-09-06

2 pepper plants should be ok but the root system gets quite large I would not try more than 2.

rgerber1 (author)2011-06-30

How often do you water? timer? etc.

fegundez1 (author)2011-05-12

where is instructable? this appears to be a link

Get Forked (author)fegundez12011-05-12

Thanks for the heads up it looks like the video did not embed. But its fixed now

About This Instructable

47,184views

57favorites

License:

Add instructable to: