In this instructable I will show you how to make an instructables robot necklace, this project can be completed in about an hour, and looks great when completed! this can also be added to your Halloween Costume
You will need :
-A small pieces of aluminum metal
Step 1: Make the Stencle
First print out the robot picture, cut it out and place it on the metal piece and trace it with a permanent marker, I made the robot into a sticker and left it on there for now but you can just trace it.
Step 2: Cutting it Out
Now, cut the robot out with your coping saw, I clamped it down to my counter top and then cut it out. Don't worry about rough edges or square-ish legs, because you can file them out later
Step 3: Make it Purdy
Once its cut out clamp it to the counter and file the edges to make it look better. Then I sanded the top to make it smooth and look better.
Step 4: Engrave Details
Once the edges are file down i put the picture of the robot back on and used a x-acto knife to scrape the details in.
Step 5: Finishing Up
now drill the hole in the top corner of his head, and attach a necklace jump ring and string through. And You're done! Ask if you have any questions regarding the build.